How to make a micro from a SIM card. How to make a micro SIM card from a regular SIM card

Below is a guide for users who are interested in this. In fact, all the proposed manipulations with SIM cards are simple. Despite this, they do not eliminate the risk to your smartphone. Since incorrect actions can lead to damage to the card.

Similar attempts were carried out on SIM cards of the SFR operator. You can also try this with cards from other operators. First, check your SIM card with an updated chip. If the chip itself is the same, then you can take risks.

First, you will need: a sharp knife and scissors. Don't worry, this operation does not require high precision.

Now pay attention to the instruction picture. In your operations, try to give the SIM card exactly the same size. If this does not suit you, you take the card and select the size so that the card matches the edge of the micro SIM card.

Below in the picture you can see that it is not exactly the same because the chip and card size are still different.

The first part of the operation is easy, but also the most dangerous. You need to take scissors and cut off the top of the card, as shown in the picture below. This is 1mm flush with the chip.

Your task is to cut all straight lines parallel to the chip.

Now you don't have to worry about the main size. You need to cut a little flush with the chip on the left side of the card. Do everything carefully and carefully so as not to damage the chip.

This is the result you should get:

If everything went well, you can proceed to the final stage. Take the original micro SIM card in your hands and bring the SIM card to it. You should mark the line with a knife as shown below:

Trim the edges as shown in the example.

Thus, you will get a rectangle, and you will see that you are closer to your cherished goal. All that remains is to cut off the lower right corner. To do this, again look carefully at the example drawing, attach the card and cut the desired edge diagonally.

By cutting it along the line, you will have a card of the appropriate size in your hands.

Today, a regular SIM card for many phones may already be outdated, since, for example, the fourth iPhone model only supports a new format. Of course, you can simply replace your SIM card with a micro one by buying it in a store, and the problem will be solved. But then all the contacts of friends and acquaintances that are recorded on the number will be lost. In addition, there is probably a profitable one connected to it tariff plan mobile operator.

As they say, there is always a way out. A micro-SIM card can be obtained from a regular SIM card by reducing it (not the number of contacts, but the amount of plastic around them is reduced) by trimming. In this case, the model functions in the same way as the standard version.

How to cut a standard SIM card to fit a micro one

This will require a little free time and patience, as well as the appropriate tool:

• sandpaper
• pencil
• ruler
• sharp scissors

The working surface should remain untouched; only some part of the protective casing is cut off.

Dimensions

Trimming process

All information is stored on a chip that is half the size of the plastic casing, so by getting rid of extra millimeters, you can easily turn a standard SIM card into a micro SIM card.

1. The first step is to make a marking according to which the card will be cut. Using a sharp pencil, a rectangle measuring 15x12 mm is drawn around the chip. Sometimes there are enlarged SIM cards, which will have to be cut according to the foil. This will be a little more difficult to do, but if you follow this procedure carefully, you can get an excellent micro SIM.
2. Then a part of the plastic is cut off with sharp scissors; for this it is better to use small manicure scissors, as they are small in size and quite sharp. Once the process is complete, a small corner of the card is trimmed.

Bringing a cut SIM card to perfect condition

Once you have cut your card, compare its size to the slot in your mobile device where it will be inserted. All joints must meet perfectly, otherwise it will need to be trimmed somewhat again. Next, sandpaper is used to remove excess.

As you can see, this procedure does not require any special difficulties, so do not be afraid of it, pick up the tool and act. If you still don’t dare to do this yourself, you can go to a service center, where your SIM card can be easily corrected using a special tool that looks like a stapler. But you will have to spend it certain time, and the service will not be free, while this procedure does not require much complexity.

New mobile devices require a special approach. Modern gadgets They are becoming more and more compact, which is why SIM cards are becoming small. However, if you do not want to change this element, but it does not fit the new device, try to change its size. In this article you will learn how to make a micro SIM card from a regular card using a small number of tools that everyone has.

What are the dimensions of a standard element?

First of all, you should find out what size the usual standard element. It must be said that a SIM card consists of two parts: a plastic case and a very small chip on which all your information is stored. This housing in a standard card is very large, but it does not serve any special function.

Typically, the dimensions of a SIM card correspond to the following values: length - 25 mm, and height - 15 mm. The thickness remains the same for both the standard and the reduced version. Before you make a micro-SIM card from a regular card, you need to remember its dimensions: length - 15 mm, and height - 12 mm. I must say that it is quite rare, but there are cards whose chip has non-standard dimensions, so it is cut off according to the foil. Naturally, when performing such a procedure, you need to be as careful as possible so as not to damage the information section.

Ways to shrink a map

Before you make a micro-SIM card from a regular card, you need to figure out how this can be done.

1. Process the element yourself using scissors.
2. Trimming in service center. Naturally, you will have to pay for this procedure. However, a specialist will do everything quickly and very carefully. In this case, you do not have to additionally process the card in any way so that it can easily fit into the gadget slot.
3. Independent trimming of excess parts of the element using special equipment. Dignity this method is that the work will be done quickly, and the cuts will be quite neat. That is why additional processing no edges required. You can do all the steps at home. However, this device has a fairly high cost, and it is not worth buying it just to process one SIM card. It is necessary if you perform this procedure daily.

What equipment is needed for the job?

Before you make a micro SIM card from a regular one, you should collect all the necessary tools and prepare the work surface. It should be clean, dry and level. It is advisable that no one distracts your attention, since the work is very delicate.

As for the tools for work, very few are required:

• scissors (preferably sharp, since dull ones can simply break the card, and they should also not big size, so that it is convenient to operate with them);
• ruler (to determine the size of the micro-card and apply precise markings);
• knife (it should be sharp, as you will have to correct uneven edges);
• a standard sheet of white paper (before you make a micro-SIM card with your own hands, you must draw a template for it). This way, it will be much easier for you to trim the element;
• thin marker or pen (for marking);
• tape (for attaching the template to the element);
• SIM card of standard size.

Important! All actions must be performed very carefully. There is no need to rush, as if the chip is damaged, the card will have to be thrown away.

How is the map marked?

Before making a micro-SIM card out of a SIM card, mark it. This procedure is very important. The lines must be drawn very accurately. To do this, take a marker and draw a rectangle around the chip. Its dimensions are 15*12 mm. If the chip is non-standard, then you will have to trim it according to the foil. Try to make as precise movements as possible.

If you do everything right, you will be pleased with the result.

How to properly trim an element: step-by-step instructions

1. Prepare equipment and make markings on paper. To do this, transfer the silhouette of the card to a sheet and mark the location of the chip on it. Now the drawn element can be cut according to the specified dimensions. Using tape, stick the resulting square onto the standard SIM card chip.

2. Using sharp scissors, slowly and confidently begin to cut plastic case. A great option is a manicure tool. The fact is that the plastic is quite thin and can be easily cut even with small scissors. Try not to make sudden movements. You need to cut exactly along the marked lines, although you can do this by gradually separating small pieces.

3. Check the size of the received item. To do this, attach it to the template. If all the lines converge, then you have done the job. If there are small pieces of plastic left, try to carefully scrape them off with a sharp knife. You can also “shape” the element with sandpaper. This will make it look neater.

5. Now try to insert the “newly made” SIM card into your device. If it fits in without problems, then you have made accurate markings. If all actions were performed correctly, the gadget will work without problems: it will see the map and you will be able to make calls normally.

Why should you cut the card yourself?

Before you make a micro-SIM card in a service center, think about all the advantages of processing the product at home:

• there is no need to pay for the procedure;
• you can do everything yourself in accordance with the required dimensions;
• no additional equipment required (only a pencil, ruler, scissors and paper are needed);
• doesn't take much time.

In addition, if you accidentally manage to damage the card, you can always restore it. Now you know how to make a micro SIM card from a SIM card yourself. With a little patience, you will be able to use your favorite iPad. Good luck!

If you have modern phone, in particular the ultra-thin model, then you probably know that one of the features of such a device is the use of Nano- sim cards. These SIM cards are slightly thinner than standard Micro and Mini SIM cards. Despite the fact that the size of the cards is different, the dimensions of the chip on all SIM cards are the same. Therefore, you can make a nano SIM yourself from a regular or micro SIM card at any time. In almost all communication stores, such a transformation of SIM cards is done for money, albeit not much. I assure you, you are certainly capable of cutting a SIM card yourself. But, for those who are afraid of ruining their SIM card, we advise you to seek help from any communication shop.

Due to such a variety of SIM card sizes, some operators sell transformable SIM cards. Which, by extrusion, can be adjusted to fit any of the SIM card slots.

Having bought such a transformable SIM card, you will need to break off a part of the size you need. The big advantage of such a SIM card is that its size can be returned back. The main thing is not to throw away the broken part. You never know, suddenly you change your phone, which will not have a nano, but a micro or regular sim map.

So, how to cut a SIM card for Nano SIM without damaging it? I offer you two options.

Template for nano SIM card

I suggest you use two templates that will help you correctly cut the SIM card to the size you need. The template will need to be downloaded and printed.

In order to cut a SIM card efficiently and correctly, you will need good and sharp scissors, a strong construction knife or a metal scalpel, a nail file and a working plane in the form of a plastic or wooden board. It is desirable that they be even.

First template. After printing this template, you need to cut it to size and stick it on your SIM card. After that, it is cut to fit a nano SIM card. If the edges turn out to be very sharp or crooked, a nail file comes into play, which can be used to correct everything. But be careful not to damage the chip.

Second template. In order to cut out a nano SIM card using this template, you will also have to use a pencil and a ruler.

We print the template on an A4 sheet and place the SIM card on it. Using a ruler and pencil, draw lines as shown on the template. Now you can cut the SIM card along the drawn outline. But do it carefully, the chip cannot be damaged, otherwise the SIM card can be thrown away.

After the card is cut, install it in the phone and check its operation. I'm sure you managed to do everything correctly, and the SIM card will work.

The desire to include rich functionality in modern smartphones forced designers to take a fresh look at the shape of SIM cards. Gadgets require more internal memory space, powerful processors and batteries, it is important to maintain the light weight and compactness of the device. One of the solutions was the use of a new card format - nano. Do you need to cut the SIM card under application? We will tell you how to do this at home.

Cut microsim for nano-sim card

Nano-SIM is the smallest card size, only 12.3 by 8.8 mm. The legislator of the new format was the Apple company, having released another new product - the iPhone 5. At first, mobile operators There were no new type cards, and I had to reduce the SIM card myself.

The easiest way to cut a micro-SIM card under application is to remove all the plastic along the contour of the chip. Just leave a narrow strip on one side to form a beveled corner. This also applies to mini SIM cards with a small chip.

Keep in mind one feature of nano-SIM - it is thinner than mini and micro format cards. The first has a thickness of 0.67 mm, and the second and third have a thickness of 0.76 mm. This problem can be solved using a regular nail file or sandpaper. After trimming, slightly sharpen the SIM card along the contour and along the plane so that it fits freely in the device slot.

An old-style card for a nano-SIM card

Old SIM cards have a large chip size, exceeding the nano-standard size. But you can also cut off an old SIM card. Removing the edge of such a chip does not disrupt the operation of the contacts.

It is easier to cut out a nano-shape from a mini-SIM card, since there is a place that allows you to hold the card while manipulating with scissors. Using a utility knife will make the task much easier.

Step by step steps:

• Use a pen or thin marker to mark the new dimensions on the chip side so that you can see if the lines overlap the contacts;
• cut off the excess plastic, clamp the card itself with tongs for more precise manipulations;
• sharpen the card with a file along the contour to remove nicks, and sand the surface of the plastic on the side of the operator’s logo to make the card thinner;
• insert the SIM into the card holder; if it does not fit, repeat the previous operation until it fits completely into the slot.

If you still have unnecessary SIM cards, practice using them. The chance of the correct result of the pruning procedure will increase significantly.

An alternative to converting a card into a nanostandard yourself:

• contacting the salon cellular communications, where the SIM will be cut to the required size using a special cutter;
• contacting the official office of the operator to replace the SIM card with the required form.

Nano SIM card template

A more accurate way to trim the card correctly is to use a template. It can be downloaded here. When printing the template, set the scale to 100% for A4 sheet.

• Print out the stencil. No color printing required.
• Cut out the nano size template.
• Using glue, or better yet double-sided tape, attach the template to the SIM card from the operator logo side.
• Carefully cut the plastic with scissors or sharp tweezers.

If you don’t have a printer at hand, you can draw the future size directly on the card using a ruler and pencil.

How to do it:

• position the SIM card so that the cut corner is in the lower right corner;
• draw a vertical line along the left edge of the chip;
• measure 13 mm from the left edge of the chip and draw another vertical line;
• draw a horizontal line along the top edge of the chip;
• set aside 9.5 mm from the top edge of the chip and draw a line.

The resulting rectangle will be the new SIM size. All that remains is to cut down a small corner.

Popular devices with nano-SIM cards

The table contains a list of the most popular smartphones, working with nano-SIM. Check out the list to see if you have decided to purchase one of these models. Then the service of cutting the card or replacing it with the operator with a new standard will be relevant for you.

Trim SIM card for iPhone 5s , as for any other model, you can do it at any mobile phone store, right where you buy your smartphone. This service is provided on a paid basis. You can also get a nano-SIM at your operator's service point, the service is free.