If you have lost the remote control from your LG TV or it is completely out of order, and you cannot find the exact same one in the store, try using one of the universal devices this category. Universal remote remote control requires precise configuration and connection, these are the processes we will consider in this review.
Depending on the model of the remote control, the process of connecting to the TV may differ, but knowing the basics of the settings, you can intuitively guess what to press. Setting is possible only when the TV is on, so activate it from the button on the case. Also check the presence of batteries in the remote control and preferably their performance, if possible.
When both devices are active, press the SET button on the R / C, hold it down until the LED next to it lights up. Next, you will need to enter one of the codes that are designed for your TV model. These codes are supplied with the universal remote control.
When the code is entered, the LED, which I wrote about above, will remain on without stopping, while before that it should have just blinked. Now, without using numbers, check the operation of the remote control, for example, turn up the volume. If there is no result, enter the next number combination from the code list. One of the codes will definitely work, as soon as this happens, press the SET button again, after that the setting will be saved and the indicator will stop lighting up, it will light up only when you press one of the keys.
Likewise, you can set up a universal remote control for other LG equipment, music centers, soundbars, acoustic systems, music players and even air conditioners, in other words, any equipment that is controlled from the remote control.
How to set up a universal remote remote control? When you buy a universal remote control, the seller explains to you how to set it up for your TV or DVD player model. If you were not explained for some reason or you bought the remote control from online store or once they explained to you how to set up a universal remote, but over time you forgot all this, then read this article.
I will say right away that there are quite a few universal consoles, all sorts of different modifications and configurations that differ from each other, that is, let's say there are a hundred pieces of consoles and they are all called universal, but they look differently externally, and are also configured differently. Now I will describe some of the most common ways to set up a universal remote.
Method one: If there are inscriptions on the buttons of the universal remote control: Samsung, LG, Sony, Daewoo and so on and if the name of your TV is written on the button of the universal remote, then you can try to configure the TV with a quick setting, for this you need to turn on the device to which you will configure the universal the remote control if another device is turned on nearby, such as a dvd player, then it must be turned off to avoid interference. Your TV is turned on, you point the universal remote control at the TV and press the button on the remote control corresponding to your brand of TV and hold the button pressed for several minutes until something happens, for example, the TV should turn off at this moment, release the button immediately or the volume sign will appear on the screen after you need to release the button, the whole TV should be tuned.
Method two: When buying a universal remote control, the box should contain a small book or a piece of paper folded several times, it contains instructions for setting up a universal remote control and many more different numbers. Let's dwell on the numbers. The numbers written in the book are codes for setting up the remote control. As a rule, a universal remote control has a small indicator light that informs about the status of the remote control. If you are already ready to start setting up the remote control, then open the code book, find the codes you need, for example, the codes for the TV are signed on top of "CODE LIST FOR TV" if you need a code for the TV, look for the brand of your TV in this list, opposite your brand the TV will already have written codes for your TV, there are many codes for each brand, several codes, but you only need to enter one code into the remote control, it often consists of four digits. Then, when you find the code for your TV, turn on the TV, direct your universal remote control to the TV, press the "SET" button and the (on / off) button of the TV at the same time, the light should light up, then dial the code for your TV on the remote control, the light should go out. The entire console is configured. If the code did not fit which you entered first, then you can try to enter another code in the same sequence.
Note: if your universal remote control does not have a button with the name "SET", then most likely you have a multifunctional remote control and is configured for a TV, dvd player, satellite dish and so on. In this case, it is necessary to simultaneously press another button instead of the "SET" button. For example, if you are setting up the remote control for a TV, then simultaneously press the "TV" button and the (on / off) TV button, then the indicator light should light up and you enter the code as described in the second method for setting up the universal remote control.
To control TV equipment from a distance, equipment manufacturers are trying to equip the device with a remote control. In some cases, you have to buy a universal TV remote to perform such actions. About what this device is and about the differences from the original version later in the article.
In order for the Smart TV TV to receive a high-quality image, you must use the function digital television... In most cases, a special receiver attachment is used to connect such equipment. In this case, the user has two remote control devices at once.
Not many people like the presence of an additional remote control, and therefore users are trying to get rid of the unnecessary old one so that it does not clutter up the space inside the room. For this purpose, you need to purchase a special universal PU, which will replace two remote controls at once - to control the TV and set-top box.
Despite the development modern technologies, PU has remained unchanged for many years. It may differ slightly in shape, but the design remains the same - electronic circuit, the presence of a large number of buttons and a plastic case with LEDs. Also, the set of equipment must include a power source - batteries.
The universal PU has the same filling as the standard version, but it will have to be configured in such a way that unnecessary remotes remain unused.
Many users are interested in the question: "can any remote control become universal for all TVs?" The answer is simple - no, not everyone. Externally, the remote controls will be very similar, but the filling is slightly different for the universal model.
Having bought a universal remote control, you need to look for codes for the required TV models and configure the remote control to manipulate several devices.
Top 3 best universal remotes
- REXANT 38-0011.
- Vivanco UR 2.
- One For All URC 6810 TV Zapper
Difference between original and universal remote
If a set-top box is used in the house, for example, Tricolor TV or House RU, then the remote control from these equipment by itself is useless without the corresponding pair - from the TV.
The principle of operation of any remote control consists of three main actions:
- When the user presses a certain key, the required microcircuit, and the electrical impulse goes to the TV.
- Signal transmission is carried out thanks to the LED, which receives a specific command and sends a pulse to the TV with which it is paired.
- A phototransistor is installed in each TV. It receives an infrared signal from the control unit and converts it into an electrical impulse, which is transmitted to the control unit. As a result, the TV reacts to the perfect command.
To control the TV from the remote control, a special communication method is used, which is called PCM. This principle is also called a pulse traverse modulator.
The peculiarity of the equipment is that for each command from the remote control a three-digit code is assigned, for example:
- 000 - deactivate the TV;
- 001 - switch to the next channel;
- 010 - return to the previous channel;
- 011 - turn up the volume. 100 - decrease the volume;
- 111 - activate TV equipment.
From this we can conclude that when you press the remote control button, the installed electronic circuit inside the PU activates an infrared diode that will work according to a certain pattern: "111" - ON, ON, ON.
The signal length will be interrupted in standard steps of a few milliseconds. When adjusting the volume, the code "011" is used. This means that the diode will do three such actions at once, but with a certain delay: it deactivates, turns off, and then turns on again.
You can find several types of remote controls in stores:
- original;
- universal;
- unoriginal.
Non-original and original PUs are designed to control certain TV models. Their difference lies in the fact that the original version goes on sale along with a specific TV, and not the original one is bought to replace a deteriorated or lost model.
Universal PU, can be programmed according to the instructions for a specific TV, it is suitable for different options. The equipment is recommended to be connected to the TV if the original PU is lost or broken.
UPDUs vary in shape, color, size and design. The user will be able to choose depending on their preferences. A special program is built inside the equipment, consisting of several codes that match the signal of each TV device. For correct setting you will need to know this code in advance.
How to set up a universal remote
To activate the universal PU, it is necessary to power it by placing the correct type of battery in the corresponding socket. In some remote controls, batteries are not included, and you will have to purchase them.
Helpful advice: It is advisable to purchase non-AAA batteries, rechargeable batteries that can be recharged many times. This will save you a lot of money. Together with the nutrient, they sell a special slot where they can be installed for recharging. To carry out the operation, you will need to connect the device to electrical network at home.
Once the universal remote is powered, you can proceed to the Smart TV pairing operation. On the remote control, you must select the appropriate mode: TV, DVD or Audio(some models have other options).
You can watch the setup of the remote control in the video below, however, for each specific case, below we will consider the setup manually and in the machine.
To connect to a TV device, you need to use the "TV" button. To activate, you need to hold down the button for about 3 seconds and wait until the indicator on the front control panel lights up.
Next, you should enter a specific code from the model of your TV equipment. To find out this parameter, you will need to study the instruction manual.
There are several ways to set up a universal TV remote control - manual and automatic.
Manually
As mentioned above, for each TV unit there is a specific pairing code, which is necessary for fine tuning the universal control panel.
After its introduction, you need to perform a certain order of actions.
Setting up a universal TV remote control:
- For the Supra remote control - point the remote control exactly at the TV and hold down the Power button, after which a window will appear where you will need to enter the code from the device. If the numbers are entered correctly, the LED will blink several times. At this point, the Power key can be released.
- For the Huayu universal remote control, hold down the Set and Power buttons at the same time. Wait until the LED starts blinking. Next, you will need to enter a 4-digit code. After the diode goes out, you must press the Set button.
- For universal PU Beeline, you should activate the "TV" button and simultaneously press Setup and C.
After completing the installation, the device will blink several times. This is a sign that the keys can be released. To check if the equipment is working properly, it is necessary to turn up the volume of the TV. It is important to note that if you do not enter the code for certain time(60 seconds), then all the settings will have to be done again.
Automatically
To set up the remote control in automatic mode, it is necessary to press a combination of four nines on the button panel of the remote control without removing your finger from the "9" key. If everything is done correctly, the TV is deactivated.
After that, the automatic selection of channels will begin. The operation may take approximately 15 minutes. This option is used if the user does not have a code for setting up a universal remote control.
How to set up a universal TV remote control:
- For the Supra remote control, you need to turn on the TV, point the remote control directly at it, and hold down the Power button for 6 seconds. The LED should light up. If the TV device responds to a decrease or increase in sound, then the setting in automatic mode was successful.
- On the Huayu PU, you need to hold down the Set button and immediately after it Power. It is important to do the operation correctly - the keys are not activated simultaneously, but with a short interval. After that, you can release the diggers. Hold Power again. Make sure that the volume appears on the TV screen of the device. To exit the program, you need to click the Set key several times.
- There is also a third setting option that can be used for universal remote controls. The TV set, as in the previous cases, should be turned on. Then press the "TV" button and hold it until the LED starts to light up (on some models, blinking may start). Hold down the Mute button to start searching. At the end of the process, it is necessary to activate any key of the universal control panel and make sure that the TV unit responds to commands.
Universal remote control codes
To set up a universal PU, you need to know a specific number from a specific brand of TV device. Codes for universal remotes from TVs are written in the data sheet of the device. Also, information is available on the official website of the manufacturer. There is a table of codes with the correct values.
It doesn't matter from which TV the remote control is (Samsung, Philips, Toshiba, Panasonic or other popular brands), without the appropriate code, it will not work to set up the equipment. Therefore, before buying, it is advisable to find out all the available information about the TV and PU.
It is easy to use the universal remote control - point at the TV and press the desired key. Everything is the same as with a standard remote control.
This article gives detailed instructions How to set up a universal remote for all TVs. One such device can easily replace all other remote control devices in the house. The UPDU can give commands to different equipment thanks to a special microcircuit that can generate several pulses at once.
Experts recommend purchasing UPDUs with liquid crystal or touch screens as they are more convenient and reliable. To date, the range of remote control equipment on the market is large, controllers can vary in configuration, cost, design, and most importantly, have different codes for control.
Codes for universal remotes can be viewed on the Internet; the entire list is presented on many resources.
Below are the options on how to set up a universal remote control to control the TV of the most popular brands.
The Supra brand universal remote control is configurable with two options.
Manual setting
- Find and download a suitable code on the Internet that will match the user's TV panel.
- Connect the screen to the network.
- Direct the Supra UPDU to the TV.
- Press the "Power" key and at the same time enter the required code.
- The "Power" key must be kept pressed until the light on the remote control blinks twice.
- The basic setup of the universal remote control is now complete.
- Then you need to check all the buttons on the device. If the device does not work, try downloading a different code.
Automated
Instructions on how to configure the Supra remote control using automatic configuration:
- Switch on the equipment.
- Aim the remote device at the screen.
- Press the "Power" key and hold it for a few seconds, the indicator on the remote control should light up.
- If the setup operation is successful, the “volume” label will appear on the monitor.
- Check how the configured device functions.
UPDU Supra is ready to work.
HUAYU brand
You need to configure the Huayu remote control as follows:
- Press simultaneously the "SET" and "POWER" buttons on the huayu remote control, after which the device will enter the programming mode. The diode on the huayu keypad lights up continuously during the programming process.
- Use the VOL key to set the required command.
- To exit the mode, press SET again.
Remote devices from this manufacturer are best suited for LSD and LED panels, you should also be aware that there is a setting diagram on the back of the device.
Thus, you can configure remotes for TVs from the manufacturer Unimak.
The old versions of the Beeline PU had many difficulties when setting up, they could only be connected using a set-top box, they did not have that UPDU and the Setup key. But Beeline has improved the technology, so the new versions already have the Setup button, moreover, now it has become quite easy to set up the equipment. By design, it is not a very large remote with a lot of buttons.
Instructions on how to connect the Beeline console to cisco.
- Turn on TV.
- Press the Setup and C buttons on the Beeline control panel at the same time.
- After that, you need to wait for a while, the Stp key will be initialized.
- After the diode blinks twice, the buttons are released.
- Checking the operation of the device is carried out using the VOL key.
If the binding occurs to other consoles, then the circuit is turned off a little, namely step number 2.
- on the console Motorola you must hold the SETUP and B keys;
- and if the binding goes to the Tatung prefix, then the command is executed using the SETUP and A.
This is the basic information on how to set up universal remotes from different brands to your TV.
Conclusion
If the device does not work after the performed actions, it is recommended to look at the codes again and carefully study the instructions. The user manual gives full characteristic What is a universal TV remote control, how to set it up correctly, is also described in detail.
In the event that repeated attempts to connect were unsuccessful, it is recommended to seek help from service center, since the device may have a defect. If this is confirmed, then you need to return the low-quality equipment to the seller. Read also, and.
The days when it was possible to switch the TV only manually are long gone: today all TVs have a remote control, and sometimes more than one.
Unfortunately, the remote is a rather fragile thing: it can break or get lost, and buying a new one can be a serious problem.
To prevent this from happening, universal remotes have been developed that make the life of the owner of the equipment much easier.
How do they work
Many have probably noticed that the TV can only be controlled by its "native" remote control: for example, the remote control from the "LG" equipment will not work on "Philips" or "Toshiba".
The work of the universal remote control is to intercept the signal, its recognition and further use.
The advantages of such remotes include ease of use and the ability to easily replace the main one. In addition, universal remotes are usually inexpensive and readily available from all stores.
In this case, the remote control can be reprogrammed when changing the TV itself or use it as a remote control for an air conditioner or other equipment. The cost of such remotes is usually low: for example, Supra remotes cost less than 500 rubles.
Its useful to note: universal remotes may not be suitable for all equipment: it is worth checking with the seller in advance about the "compatibility" of the devices.
It is also important to remember that when replacing the batteries, most will need to reset the settings. Another unpleasant feature can be a mismatch between the buttons and the action being performed: this can happen if the remote control is poorly compatible with the device or is incorrectly configured.
By setting options, the consoles can be:
trained: all programs are already "packed" inside, the owner only needs to select a program;
programmable: manual configuration required.
According to their management capabilities, they are divided into:
TV remotes;
remotes from all household appliances: thanks to them, you can control all devices with one remote control - air conditioning, VCR, etc.
By appearance They may be:
traditional, for example, consoles "Rexant rx 7 7e", "139f", "Gal Im p 1", "Hama";
in the form of a keychain, for example, "Mustery", "Huayu".
It's important to know: remote controls in the form of key fobs usually have little functionality: they can turn the device on and off, adjust the sound and change channels, and also call the setup menu.
Among the most popular manufacturers are Sony, Inc, Philips, Sharp, Rolsen, Benq, Hyundai.
Setting up the remote
If the choice fell on a trained remote control, the owner will need to program it in several steps:
find the code of your TV in advance in the instructions or on the Internet;
press the "SET (TV)" button and wait for the diode to light up;
press "POVER" and enter the desired code, if the diode does not go out, press "MULT".
When connecting a programmable remote control, you must:
press the "SET (TV)" button;
hold down the "POVER" button and point the remote control at the switched on TV;
the remote control will begin to read the signal and select the built-in code on its own, at this time the diode will blink;
as soon as the TV “reacts” to the remote control (changes the channel, turns off the sound), you must press “MUTE”.
The reaction of the technician can be anything: it depends on the model of the TV and the remote control. When choosing a remote control, you need to check its compatibility with the technology and, if possible, purchase a device from the same company as the TV.
A universal remote control can be extremely useful in many situations: when you lose the main remote control or when you lose control. Most often it is used as a replacement, but the universal remote control can also become a full-fledged replacement.
Watch a video in which an experienced user explains how to set up a universal TV remote:
Dear Readers! Our articles tell about typical solutions legal issues but each case is unique.
If you want to know how to solve exactly your problem - contact the online consultant form on the right or call:
