Dear customer !!! If you do not want to bother finding a remote control on our website, then you can send us a photo of the old remote control or a photo of the remote control from the manual or the name of your device (usually the device model is written on the back cover, see the section "SELECTING THE CONTROL").
Send a photo to WhatsApp, Viber, Telegramto number 8-926-226-19-28 ... We will select a remote control for you and contact you to place an order.
How to find the remote control you need on our website:
- To do this, you need to know the TV model or the remote control model.
- The remote control number can be viewed on the remote control itself. It can be either on the front or on the back of the case (often found in PANASONIC), or under the cover or on the battery compartment cover (most often there is a number with PHILIPS). Some manufacturers do not write the number on the remote control, and in this case, you need to watch the model only on the equipment itself (TV, dvd, etc.).
- The TV model can be viewed on the rear wall (cover) of the TV. The sticker on which the TV model is written is usually located in the center of the cover.
- Find out the model of the remote control or your device, enter this number in whole or in part in the search box. The search engine will display remotes that match your request. If several remotes have dropped out, then you select the one that fully matches your model and is similar in outward appearance to your old remote.
- If you do not know the model of your remote control, and the search by equipment model did not help you, then you can find the remote control by its appearance in the catalog (catalog of categories and brands).
- If you doubt the choice of the remote control and want us to double-check the correctness of the selected remote control, then in the comments to the order, write us the model of your device.
- If you have not found the remote control you need on our website, this does not mean that we will not be able to help you. Send us a photo of the old remote control or the model of your device to email [email protected] yandex.ru You can also send us a question by feedback, and our manager will contact you.
Original remotes for TVs, video equipment, audio equipment
- Non-original remotes for TVs, video equipment, audio equipment
- Universal remotes for TVs, video equipment, audio equipment
- Learning remotes for TVs, video equipment, audio equipment
- Programmable remotes for TVs, video equipment, audio equipment
I just can't change the ancient TV in the hall. Children are small, they can break. And the old box is not a pity.
So I decided to buy a set-top box for watching digital TV for an old TV, since there is not enough one in the house.
Took one of the cheapest since specifications all are the same.
There was also a standard box inside:
The package contained a small remote control:
In addition, there was a manual with a very small print and a cable for connecting to a TV. tulips. HDMI cable the manufacturer squeezed, but I didn't need it.
There is another set-top box at home, so there were no problems with the settings. The set-top box caught all 20 channels, and with a homemade antenna made from beer cans. Reception is stable, better than that of Rolsen's analogue. But he switches channels very slowly, you get tired of waiting. This is a big disadvantage. Very annoying.
Otherwise, the device is working. Reads movies from a flash drive. Again, many movies are buggy. On some there was no sound, on the other console they went without problems. You can record your favorite shows, but I don't use this function. After all, everyone has the Internet, you can watch your favorite programs online, and not record on a flash. In general, do not regret the extra 100 rubles, and buy something else.
Video review
| All (5) |
|---|
 setting up a digital TV receiver
|
Receiver / media player HD-501RU with a remote infrared receiver and powered by USB TV or an external power supply unit (included in the kit), designed to receive open digital DVB-T / T2 programs of any resolution (SD and HD) and, if necessary, provides the function of recording programs on external USB storage... This type of receiver can also be used as a media player (for example, listening to music files, viewing photos or films recorded on any media).
The receiver connects to the TV via a composite video output or HDMI interface for transmitting a high-definition signal.
Receiver HD-501RU designed for placement behind a TV set or in a car, since the package contains an external IR sensor.
Assembled receiver HD-501RU based on the MSTAR7T01 processor. The digital tuner allows you to stably receive DVB-T2 channels even while driving, provided the distance from the signal source is within 10-30 km.
Assembling the DVB-T2 receiver Ether HD-501RU produced in Novosibirsk. Low cost with a full set of basic functional properties ensures wide demand for it.
Peculiarities
- Low cost. Miniature receiver (98x48x18 mm).
- Remote infrared receiver... The receiver is designed to be placed behind a TV.
- Receiving DVB-T / T2 digital television signals on analog TVs.
- Decompression of the MPEG-2 and MPEG-4 compression standards.
- Support for video resolutions: 1080p, 1080i, 720p, 576p and 576i.
- Multilingual menu.
- PVR and TimeShift functions (recording on HDD) using external USB drives.
- HDMI digital audio / video output.
- Analog composite audio / video output (3RCA-3.5 Jack) for outdated TVs.
- EPG (Electronic Program Guide) for 7 days (determined by the DVB-T2 provider).
- Automatic and manual search on all channels.
- Small-sized (108x40x18 mm) convenient intuitive control panel remote control(Remote control).
- Power supply + 5 V through the central core of the cable to the mast amplifier.
- Modern processor Mstar 7T01.
On the front and side panels of the receiver there are
On the back of the receiver there are
Assigning buttons on the remote control
Receiver technical parameters
| Tuner | |
| Input connector | IEC socket (TV socket 169-24), 75 Ohm |
| Frequency range input signal | 170-230 MHz (MVIII), 470-862 MHz (UHF) |
| Input signal level | -20 ... -85 dBm (24 ... 89 dBμV) |
| Antenna power | 5V / 50mA (switched) |
| Demodulator | |
| Standard | DVB-T / T2 (COFDM) |
| Channel strip | 6/7/8 MHz |
| DVB-T2 operating modes | 2K, 4K, 8K |
| Carrier modulation | QPSK, 16 QAM, 64 QAM, 256 QAM |
| Guard interval (GI) | 1/128,1/32,1/16,19/256,1/8,19/128,1/4 |
| FEC | 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 |
| Transport stream decoding | |
| Video format | MPEG-2 [email protected], MPEG-4 AVC / H.26, [email protected] |
| Audio format | MPEG-1 (Layer 1,2,3), WMA, AC3 |
| Flow rate | 0.5-15 Mbps |
| Video resolution | 576p, 720p, 1080i, 1080p |
| Video image format | 4: 3, 16: 9, Pan & Scan, Letter Box |
| TV standard (analog output) | PAL / NTSC |
| External storage (USB 2.0) | |
| Supported volume | 500 GB |
| Supported formats | MKV, AVI, DIVX, VOB, FLV, MP4, MP3, WMA, JPEG, JPG, BMP, ASF, 3GP |
| Audio / video and data inputs and outputs | |
| RCA audio / video | composite |
| Digital video / audio | HDMI 1.3 |
| Data transmission interfaces | USB 2.0 |
| Length of connecting RCA output cable | 1m |
| Power supply | |
| Supply voltage | ~ 100-240 V / 50 Hz |
| Energy consumption | <8 Вт |
| General | |
| Dimensions (edit) | 98x48x18 mm (with connectors) |
| Weight | 0.125 kg |
| Remote control dimensions | 108x40x18 mm |
| Packing dimensions | 190x165x55 mm |
| Power cord length | 1m |
| IR remote cord length | 1m |
| Frame | plastic / black |
| Service warranty period | 12 months |
| Operating temperature range | 0 ... + 40 ° С |
Datasheet for the DVB-T2 receiver "Ether HD-501RU" >>>
Related products
Connecting cable HDMI-HDMI gold with filters is intended for transmission of high-definition digital video data and multichannel digital audio signals. It is used to connect to many new generation devices: television sets, multimedia players and other video devices with a corresponding connector.
A distinctive feature is the presence ferrite filters, which increase the inductance of the wire section passing through it by several hundred times, this provides suppression of high-frequency interference. Ferrite beads on the cord are used as additional external filters, the presence of which guarantees compliance with all quality standards and allows you to achieve:
- high definition video transmission (Full HD) with maximum resolution (1080p);
- support of the most popular 3D technology;
- support for extended color spaces, relevant for modern television equipment.
